W6-S N300 in-wall Wireless Access PointSpecification
| Model | W6-S |
| Category | In-wall |
| Dimension | 86*86*34.8mm |
| Interface | One 10/100 Mbps Ethernet Port One 10/100 Mbps Ethernet Port (PoE) |
| Button | 1*Reset |
| LED Indicator | 1*SYS |
| Maximum Power Consumption | 3.4W |
| Power Supply | PoE 802.3af |
| Max. Number of Clients | 64 |
| Recommended Clients | 5 |
| Antenna | 2*2dBi |
| 2.4GHz maximum power | 18+/-1.5dBm |
| Reception Sensitivity | 2.4GHz 802.11b -90dBm 2.4GHz 802.11n (MCS7) -72dBm |
| Frequency Range | 2.4GHz |
| Standard&Protocol | IEEE 802.11b/g/n |
| Maximum wireless speed | 300Mbps |
| Bandwidth | 20MHz/40MHz |
| Operating Mode | AP/Client AP |
| Max. No. of SSID | 2.4GHz: 4 |
| Hide SSID | Support |
| OFDMA | Support |
| Beamforming | Support |
| WEP | Support |
| WPA-PSK | Support |
| WPA2-PSK | Support |
| WPA | Support |
| WPA2 | Support |
| Access control | Support |
| Adjustable power transmit | Support |
| Automatic channel | Support |
| AP isolation | Support |
| Guest network | Support |
| Connected clients control | Support |
| RSSI Threshold | Support |
| Weak signal terminal elimination | Support |
| Prioritize 5 GHz | Support |
| VLAN tagging for SSID | Support |
| LED control | Support |
| Diagnostics tool | Support |
| Reboot at specified interval | Support |
| Scheduled reboot | Support |
| System Logs | Support |
| Device management | M3 or Tenda Router with AP Controller feature |
| Firmware upgrade | Support |
| Reboot | Support |
| Reset | Support |
| Backup configuration | Support |
| Restore configuration | Support |
| Default IP | 192.168.0.254 |
| Default username | admin |
| Default password | admin |
| Operation Temperature | -10℃ ~ 45℃ |
| Operating Humidity | 10%~90% non-condensing |
| Storage Temperature | -30℃ ~ 70℃ |
| Storage Humidity | 10%~90% non-condensing |










































Reviews
There are no reviews yet.