- Newly-developed sensory sensor unit inside;
- Independently for many special applications;
- Wired transmitting digital signal to control panel;
- Intelligent logic control, eliminate false alarm;
- Microcontroller temperature analysis and Automatic temperature compensation for best summertime detection
The Stand-Alone Gas Leakage Detector is an INPUT DEVICE designed for natural gas,LPG detection. It can use independently. Upon detection of natural gas and LPG, the GL-01 automatically generates sound & flash alarm. The unit is RF and EMI Immunity to interferences produced by radio device.
| General | |
| Operating Voltage | AC85V-265V |
| Standby Current | ≤90mA |
| Alarm current | ≤100mA |
| RF Immunity | > 20 V/m 10 – 1000 MHz |
| Alarm Sensitivity | 10%+/-5 LEL |
| White Light Immunity | > 8000 lux |
| Noise(Vp-p) | <200mV, (mVp-p)(25°C) |
| Alarm Output | sound & flash alarm |
| Temperature range | -10°C to +50°C |
| Relative humidity | Less than 95% (25 C) |
| Installation Mode | Wall Mounted |
| Housing | High-impact ABS |
| Dimensions | 115mm x 72mm x41mm (HxWxD) |
| Applications | For indoor use. |




























Reviews
There are no reviews yet.