DataSheet

Features

• Cutting Modular Cable:- Place the single-bladed side of the tools cutter facing you and cut the modular cable to the desired legth. Make sure to cut the ends of the cord straight across, not diagonally.
• Stripping modular cable (Flat Cable):- 2a. Insert 4P/6P cable into the two-bladed side of the tool’s stripper unti it touches the stop guide.
• Insert 8P/cable into the two-bladed side of the tool’s stripper and let it extend a little past the lower cut blade.
• Squeeze handles until it stops, cable must be kept perpendicular and then pull from the tool.
  Stripping Round Cable
• Insert the cable into the round stripping hole, and turn the crimper in a counter-clockwise direction and the cable clockwise at the same time.
• Remove the outer jacket, insert the stripped cable into the plug, and be sure the left wire at one end matches the right wire at the other end.
• Place a modular plug with cable into the tools holder. Be sure the stripped wire is between the tab and gold contacts. Squeeze handles until it stops.
• The 4P holder is located on the back side of the tool.